7 Best Aluminum Floor Jacks of 2021

Jerry Wilson
Written by
Last update:

If you’re using jacks in your automotive repair shop, then it’s important you choose the best one on the market.

Aluminum floor jacks are sturdier than the less expensive, cast-iron jacks. They provide a much flatter lift and rarely require maintenance.

NameCategoryProduct
Arcan 3-Ton Quick Rise Aluminum Floor JackBest OverallArcan 3-Ton Quick Rise Aluminum Floor Jack
Arcan 2-Ton Quick Rise Aluminum Floor JackBudget PickArcan 2-Ton Quick Rise Aluminum Floor Jack
JEGS 80077 3 Ton Professional Low-Profile Aluminum Floor JackUpgrade PickJEGS 80077 3 Ton Professional Low-Profile Aluminum Floor Jack

1. Arcan 3-Ton Quick Rise Aluminum Floor Jack

Our rating: 9 / 10

Arcan 3-Ton Quick Rise Aluminum Floor Jack

Check Price on Amazon

Pros:

  • Comfortable and Ergonomic Lever
  • Dual-stage Pump
  • Easy-to-read Graduation
  • Available in 3-Ton, 4-Ton, 5-Ton, and 6-Ton
  • Multiple Functions

Cons:

  • Not as sturdy as other aluminum floor jacks
  • Some users report leakages

Finding the perfect jack can be a challenge. When doing your research, you’ll notice that most aluminum jacks are similar in price and performance. What can make a difference is the brand you invest in.

Arcan has produced some of the most highly rated aluminum jacks on the market. The Arcan A20018 3-Ton Dual-Stage Aluminum Floor Jack boasts an ergonomic handle made of solid steel for maximum durability and comfort. The steel handle is covered by a thick foam layer to ensure maximum comfort and safety.

The dual pump piston action allows you to drill down into the toughest obstructions. It allows you to lift your car up to 33 mm / 1.3 inches higher than other ordinary aluminum jacks.

2. JEGS 80077 3 Ton Professional Low-Profile Aluminum Floor Jack

Our rating: 8 / 10

JEGS 80077 3 Ton Professional Low-Profile Aluminum Floor Jack

Check Price on Amazon

Pros:

  • Pump is attached to the jack for convenience
  • Pump is included
  • Heavy duty

Cons:

  • Heavy and bulky
  • Not a jack that you would have for your road trips

This model of JEGS Triple Tube Low Profile Jack is one of the few that features an air pump that is integrated into the floor jack. The dual piston pump is well suited for the larger vehicles that are commonly used in a repair shop environment.

The pump has a capacity of 1350 PSI and a flow rate of 6 GPM. When using the floor jack, the pump can be used to raise or lower the vehicle at a controlled rate of 2.8 PSI per second by using the ¼ inch NPT inlet.

While the floor jack will raise a vehicle with a ground clearance of about 6.5 inches, the jack has a maximum height of the working tread of about 18 inches (480mm).

3. Sunex 6603ASJ 3 Ton Aluminum Lift

Our rating: 8 / 10

Sunex 6603ASJ 3 Ton Aluminum Lift

Check Price on Amazon

Pros:

  • Easy to use and open
  • Suitable for different applications
  • Large lift
  • Easy to store away

Only weighs 30.3 pounds

The Sunex 6603ASJ is an aluminum floor jack that serves the purpose of both a jacking device and a hydraulic lifting device. Is this jack worth the price? The Sunex 6603ASJ has the reliability of its name, and people looking for something to take on the road should take a closer look at it.

It has a hydraulically driven pump and a mechanical cylinder to make lifting things easy and quicker. It can lift loads up to an incredible 3 tons; it surely is one of the best aluminum floor jack 2018 has to offer.

4. Arcan 2-Ton Quick Rise Aluminum Floor Jack

Our rating: 8 / 10

Arcan 2-Ton Quick Rise Aluminum Floor Jack

Check Price on Amazon

Pros:

  • Affordable
  • Dual pump pistons make it easy for two people to lift

Cons:

  • Some concerns about the jack offering enough stability for larger vehicles.

If you are looking for a basic aluminum jack to get the job done at a great price point, this is a viable option. It’s another member of the Arcan ALJ2T family of jacks. This model is a dual pump jack with two pumps rather than one. The jack has two separate pistons which operate independently of one another. This jack has the ability to lift a vehicle up to two tons, which is a decent amount. A single person could easily use this product, but it is designed to be used with two people.

The dual pistons on this jack can be used to lift a vehicle up or down very quickly. You can raise the vehicle up to about 2.5 inches per second or lower it at the same rate. On a single pump, you can bring the jack up 6 inches. This jack can be used to raise or lower the vehicle in a variety of different positions. Another notable feature is the reinforced lifting arm. This is a metal piece that is designed to help stabilize the jack when lifting. This can be especially helpful when lifting a vehicle.

There are a few concerns about this jack. The most common concern is that the jack isn’t stable enough.

5. NOS NSJ0301 3-Ton Aluminum Service Jack

Our rating: 7 / 10

NOS NSJ0301 3-Ton Aluminum Service Jack

Check Price on Amazon

Pros:

  • Ideal for occasional use
  • High quality aluminum-made jack
  • The jack is rust-free and includes a 3-year warranty

Cons:

  • Poor design of the brace makes the jack unstable
  • Black finish is not suitable for high debris areas

The NOS NSJ0301 is an all-aluminum floor jack that is available in both 3 and 4 ton capacity models. Both models have a classic design that includes a comfortable handle that is easy to hold and operate. The jack has a classic single pumping system that is solid and easy to use, and very stable when compared to jacks with dual pumping systems.

The jack includes a base that has a flexible expansion joint, which allows the jack to slide under the vehicle sidewall without a problem. The jack also has a raised valve arm, which also designates it as a class 1.5 hydraulic jack.

The NOS NSJ0301 features a dual piston ram that is easy to control and has plenty of power. One thing to note is that this jack does not include a pump, so you will need to purchase one separately. Also, the black finish is not suitable for high debris areas, so it cannot be used in garages or for other industrial applications.

6. Powerzone 380044 3 Ton Aluminum and Steel Garage Jack

Our rating: 6 / 10

Powerzone 380044 3 Ton Aluminum and Steel Garage Jack

Check Price on Amazon

Pros:

  • Lightweight and Durable
  • Easy to operate with one hand
  • Thin pads lift firmly, yet prevent damage to cars
  • Good price point

Cons:

  • A little more difficult to maneuver due to the extended handle
  • Not the best for heavier cars

This jack is probably the best bang for your buck. Unless you are a long distance traveler, you do not need to go above 3 tons. Anything over that is just overkill in most cases.

This jack has a single pump that does the work. Many of the other jacks require you to pump several times using 2 or 3 levers. Then, it takes several minutes to get up to the right height.

This jack is the only one that I found that will support the car enough for the tire to unseat itself from the wheel jam.

7. OTC 1532A 2-Ton Capacity Aluminum Racing Jack

Our rating: 5 / 10

OTC 1532A 2-Ton Capacity Aluminum Racing Jack

Check Price on Amazon

Pros:

  • Easy to handle
  • Features an innovative lift arm that retracts with the push of a button
  • Trolley jack capability
  • Quality workmanship
  • Designed to be compact and portable

The OTC 1532A delivers 2 tons of lifting capacity with impressive speed and precision. Thanks in part to the innovative lift arm, the OTC 1532A can lift any vehicle fast and efficient.

The ratcheting handle allows you to lower your vehicle precisely to the ground while the pushbutton locking mechanism makes it super easy to set your truck precisely where you want it.

The 1532A has a built-in jackstand plunger system to help you lift your vehicle faster and easier. Simply pull the handle and extend the jack stand bolts to reach a height of 3.875”.

Frequently Asked Questions (FAQ)

What is the best aluminum floor jack?

The pump-style floor jack is a must-have product for every mechanic’s garage. If you’re doing some serious DIY, working on your car, or even a minor repair inside your home, having a floor jack makes it much easier. However, there are so many floor jacks to choose from. What should you look for when picking one?

You should consider using a floor jack that can hold a high amount of weight but still be small and light enough to carry around. A durable will is always a great added bonus … you never know when you might drop your jack and want to protect it from breaking. Plus, a durable floor jack looks more professional in your garage! Finally, having the right accessories like wheels, a handle, and security lock is also a big plus.

What is a good floor jack brand?

Campbell is one of the leading manufacturers of jack stands and tools. They’ve been around since 1906 and have a reputation for making quality tools.

Torin is a new player in the jack and jack stand industry, but they are quickly gaining a lot of traction and positive attention for their innovative designs and ideas. Their jack stands are made in the USA and come with a lifetime warranty.

Odyssey is another leading jack stand manufacturer. They’ve been making American made jacks stands for years. They’ve proven themselves by having some of the best models on the market.

What is the best 3 ton floor jack?

To answer this question we chose Fenco's 3 Ton (3TJ228MHW2) Premium Aluminum Floor Jack as the best 3 ton floor jack of the year. With the ability to support up to 3,000 lbs (1,350 kg) and a maximum lift height of 16.8 inches, this jack fits the bill for any large-scale mobility job.

Are Arcan Jacks any good?

Arcan jack's feature a 4.6 star rating on Amazon and just about every review glows with positivity. This jack is definitely worth looking into if you need to raise your ride's appearance.

For a comparable price to that of other generic jacks of the same capacity, the Arcan is built with features not usually associated with this level of jack.

It is also made by a company that cannot be found on the web, but do not let that discourage you; this is just another indication of the quality of the product.

The jack is light, weighing a mere 38 pounds. This is not a weight easily lifted by a beginner, which is another indication of the quality and durability of the Arcan.

Conclusion

There is a lot of variation in the best aluminum floor jacks and models available. We have picked the brand with the best reputation among customers for build quality. Additionally, we chose the environmentally friendly as it also have the reputation of being the most durable. All three of the floor jacks are low profile aluminum that has high quality and durability.

Our Recommendation

NameCategoryProduct
Arcan 3-Ton Quick Rise Aluminum Floor JackBest OverallArcan 3-Ton Quick Rise Aluminum Floor Jack
Arcan 2-Ton Quick Rise Aluminum Floor JackBudget PickArcan 2-Ton Quick Rise Aluminum Floor Jack
JEGS 80077 3 Ton Professional Low-Profile Aluminum Floor JackUpgrade PickJEGS 80077 3 Ton Professional Low-Profile Aluminum Floor Jack